Our company offers molding machine 2LD VELA 3040 for small series of your products. This device can operate A-PET, R-PET, PP, PVC, PS, OPS and shape both positive and negative forms, including equal arc.
Material unrolled from the roll and moved by the actuator into the first forming station is sealed into a holding frame. Subsequently arrives heater, which heats the material to the desired temperature and then travels to the starting position. Closes the form, there is a vacuum forming process, while cooling. Form goes down to the bottom dead center. Shaped material, but not a die cut is moved to a cutting station where the cut and separation of products from waste, which is wound under the machine. Both operations as shaping and cutting, take place simultaneously. Due to the length of the continuous cycle of operation equal to the finished products and directly packed into boxes.
|Workspace||300 x 400mm|
|Negative / Positive||50mm/100mm|
|Vacuum||63m³ / h|
|Max. material width||450mm|
|Max. material thickness||1mm|
|Min. Material thickness||0,2mm|
|Air pressure||0,6 Mpa|
|Compressed air consumption||0,2m³/min|
|Dimensions wxhxl||1.5 x 2 x 3.5 m|
2LD Plastic s.r.o.
Na Švarcavě 1259
504 01 Nový Bydžov
|Phone:||+420 602 601 866|